2017 World Congress on Micro and Nano Manufacturing

A Joint Conference of ICOMM/4M/IFMM

March 27~30, 2017
Kaohsiung, Taiwan

Award Winner for WCMNM2017

Outstanding Paper Award

011. Low Melting Point Metallic Alloy Direct Ink Writing at Micro-meso Scale
Abhishek Gannarapu and B. Arda Gozen, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, USA

020. Using Microfluidic Platforms to Manufacture Microlens Array
Pin-Chuan Chen, Yi-Pin Chang and Ren-Hao Zhang, Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan

028. Prediction of Ejection Force in Micro Injection Molding by Calibration of a Shrinkage Model
D. Masato, M. Sorgato and G. Lucchetta, Department of Industrial Engineering, University of Padova, Padova, Italy


Best Student Paper Presentation Award

067. Microgrooving of a Single-crystal Diamond Tool Using a Picosecond Pulsed Laser and Some Cutting Tests
Nozomi Takayama, Jun ishizuka and Jiwang Yan, Department of Mechanical Engineering, Keio University, Yokohama, Kanagawa, Japan


Honorable Mention Student Paper Presentation Award

026. Cold Acetone Vapor Chemical Polishing of Acrylonitrile Butadiene Styrene (ABS) Surfaces Fabricated by Fused Deposition Modeling
Dian-Ru Li, Jih-Kai Yeh, Jeffrey Plott, Robert Chisena and Albert Shih, Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, USA

028. Prediction of Ejection Force in Micro Injection Molding by Calibration of a Shrinkage Model
D. Masato, M. Sorgato and G. Lucchetta, Department of Industrial Engineering, University of Padova, Padova, Italy

035. Effect of Melt-pool Spacing in Re-vitrification of Glass-forming Fe-B-Si Alloy during Pulsed Laser Micro Polishing
Brodan Richter, Justin D. Morrow and Frank E. Pfefferrkorn, University of Wisconsin – Madison, Madison, Wisconsin, USA

081. Investigation on the Micro Injection Molding Process of an Overmolded Multi-material Micro Component
F. Baruffi, M. Calaon, G. Tosello, Department of Mechanical Engineering, Technical University of Denmark, Denmark
　　R. Elsborg, Ortofon A/S, Nakskov, Denmark


WCMNM 2017 Student Photo Contest

035. Effect of Melt-pool Spacing in Re-vitrification of Glass-forming Fe-B-Si Alloy during Pulsed Laser Micro Polishing
Brodan Richter, Justin D. Morrow and Frank E. Pfefferrkorn, University of Wisconsin – Madison, Madison, Wisconsin, USA
　　Patrick R. Cantwell, Rose-Hulman Institute of Technology, Terre Haute, Indiana, USA