首頁 > 系所成員 > 本系教授 > 單秋成教授 返回首頁連絡我們


姓名Name 單秋成(Chow-Shing Shin)
職稱Title 教授 Professor
辦公室Office 工綜511室
511 Engineering Building
電話Phone 33662724, 3622160
傳真Fax  
電子郵件E-mail csshin@ntu.edu.tw
個人網頁Homepage  
實驗室Lab 疲勞與斷裂實驗室(Fatigue and Fracture Laboratory)
自傳
Short Biography
學歷(EDUCATION)
University of Cambridge, England
英國劍橋大學博士
研究領域
Research Interests

材料疲勞、複合材料破壞、材料破壞與破損分析、光纖感測器
Fatigue of Material, Damage of Composite Material, Failure Analysis, Optical Fiber Sensors

教學課程
Teaching Courses
工程材料選擇與應用, 疲勞分析與防治,實驗應力分析
材料破壞與失效分析,高等材料力學(一)、(二),破壞力學
複合材料導論 應用力學(上)
Material Selections in Mechanical Design, Fatigue Analysis and Control,
Experimental Stress Analysis , Failure Analysis : Principles and Case Studies
Fracture Mechanics ,Advanced Strength of Materials
研究計劃
Research Projects
牙科根管銼機械性質評估與斷裂防治,主持人,計劃期間:07/08/01~10/07/31,委任單位: 國科會。

風力機組葉片複合材料破損分析及劣化監測技術之建立,主持人,計劃期間:06/08/01~07/10/31,委任單位: 台電公司。

  內埋式光纖感測器研究94-2212-E-002-034, 95-2221-E-002-221, 96-2212-E-002-006,主持人,計劃期間:05/08/01~08/07/31,委任單位: 國科會。

  利用微型平板試片進行疲勞裂縫延伸測試探討94-2212-E-002-031, 95-2221-E-002-219,主持人,計劃期間:06/08/01~07/07/31,委任單位: 國科會。

  複層材料應變量規性能改善研究,主持人,計劃期間:06/09/08~07/03/07,委任單位: 核能研究所。

  超臨界鍋爐在不同溫度設計下材料破壞機制分析及對應鍋爐供應商應具之適切技術能力,主持人,計劃期間:06/09/05~06/11/04,委任單位: 台電公司。   

光纖光柵在輻射環境之應用研究,共同主持人,計劃期間:06/01/01~06/12/31,委任單位: 核能研究所。   

量測原理與機工實驗課程設備研發與建立,主持人,計劃期間:06/01/01~06/12/31,委任單位: 宗倬章基金會。

  利用少量材料進行機械性質測試技術之探討93-2212-E-002-062,主持人,計劃期間:04/08/01~05/07/31,委任單位: 國科會。
研究著作
Publications

期刊論文 (Journal Papers):

  1. B. L. Chen, C. S. Shin, 2010, “Fiber Bragg Gratings Array for Structural Health Monitoring”, Special issue on Sensors, Actuators and Intelligent Processing, Materials and Manufacturing Process, 25:1-4, DOI:10.1080/10426910903426414. (SCI)
  2. C. S. Shin, B. L. Chen, J. R. Cheng and S. K. Liaw, 2010, “Impact response of a wind turbine blade measured by distributed FBG sensors”, Special issue on Sensors, Actuators and Intelligent Processing, Materials and Manufacturing Process, 25:1-4, DOI:10.1080/10426910903426448. (SCI)
  3. C.S. Shin and J.C. Huang, 2010, “Effect of temper, specimen orientation and test temperature on the tensile and fatigue properties of SiC reinforced PM 6061 Al alloy”, International Journal of Fatigue, doi:10.1016/j.ijfatigue.2010.02.015. (SCI)
  4. Y. L. Shen and C. S. Shin, 2010, “Using a distributed brillouin fiber sensor to detect strain and cracks in steel structures”, in press, Journal of Mechanics. (SCI)
  5. C. S. Shin , B. L. Chen and S. K. Liaw, 2010, “An FBG based impact event logging and locating system for structural health monitoring”, Invited submission to Special Issue on “Structural Health Monitoring for Civil Structures: From the Lab to the Field”, Journal of Advances in Civil Engineering, Vol 2010, doi:10.1155/2010/253274.
  6. C. S. Shin and M. W. Lin, 2010, “An optical fiber based curvature sensor for endodontic files inside a tooth root canal”, accepted by IEEE Sensors Journal. (SCI)
  7. S. K. Liaw, Y. S. Huang, N. Guo Mars, C.S. Shin, N. K. Chen, K.C. Hsu, J. C. Dong and P. Shum Perry, 2009, “Bridge-Scheme C+L band hydrid amplifier with optimum dispersion compensation and gain equalization”, submitted to Optic Express.
  8. Yu-Lin Shen, Chow-Shing Shin, “Distributed Sensing Floor for an Intelligent Environment”, IEEE Sensors Journal, 9 , 12 , 1673 -1678 , 12, 2009
  9. C.S. Shin, C.Q. Cai, 2008, “Surface fatigue crack growth suppression in cylindrical rods by artificial infiltration”, International Journal of Fatigue, Volume 30, Issue 3, Pages 560-567 (SCI)
  10. 單秋成,何彥儒,楊仕偉,鄭錦榮,2008, “複合材料衝擊、扭轉及膠合破壞檢測技術之比較”,臺電工程月刊 719:83-97。
  11. 單秋成,黃寬明,郭鴻達,2008,“核能電廠閥桿受力量規之研發”,臺電工程月刊 721:53-59。
  12. R.V. Prakash and C.S. Shin, 2007, “An Evaluation of Stress-Strain Property Prediction by Automated Ball Indentation (ABI) Testing,” Journal of Testing and Evaluation 35 (3): 221-232 MAY 2007. NSC92-2811-E-002-041, NSC94-2212-E-002-031 (SCI)
  13. C. S. Shin and C. Q. Cai, 2007, “Evaluating Fatigue Crack Propagation Properties Using a Cylindrical Rod Specimen,” International Journal of Fatigue, Vol. 29, pp. 397–405. NSC93-2212-E-002-062(SCI)
  14. M.C. Young, L.W. Tsay, C. S. Shin , S.L.I. Chan, 2007 “The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds,” International Journal of Fatigue, Volume 29, Issue 12, pp. 2155-2162. (SCI)
  15. S.K. Liaw, K.L. Hung, Y.T. Lin, C.C. Chiang, C.S. Shin, 2007, “C-Band Continuously Tunable Lasers Using Tunable Fiber Bragg Gratings,” Optics and Laser Technology 39 (6): 1214-1217.
  16. C.C. Chiang, C. L. Lin and C.S. Shin, 2006, “Application of the embedded optical fiber Bragg grating sensors in detecting the internal fatigue damage of Gr/Epoxy laminated composites,” Journal of the Chinese Society of Mechanical Engineers, Vol.27, No.6, pp.801-807. (EI)
  17. C.S. Shin and C.C. Chiang, 2006, “Embedded Fibre Bragg Grating Sensors for Internal Fatigue Damage Monitoring in Polymeric Composites,” Vol.321-323, pp.230-233, Key Engineering Materials. NSC91-2212-E-002 -056 and NSC92-2212-E-002-002. (SCI)
  18. U.M. Li, C. S. Shin, W.H. Lan and C.P. Lin, 2006 “Application of NonDestructive Testing in Cyclic Fatigue of Endodontic Ni-Ti Rotary Instruments,” Vol.25, No.2: pp.247-252,, Dental Materials. (SCI)
  19. C. S. Shin and C. Q. Cai, 2006 “Fatigue Crack Propagation Properties From Small Sized Rod Specimens,” 236, pp,2574– 2579, Nuclear Engineering and Design. NSC93-2212-E-002-062 (SCI)
  20. C.S. Shin and C.C. Chiang, 2006 “Fatigue Damage Monitoring in Polymeric Composites Using Multiple Fibre Bragg Gratings,” Vol.28, No.10, pp.1315-1321, International Journal of Fatigue. (SCI)
  21. C.S. Shin and C.C. Chiang, 2006 “Temperature Compensated Fiber Bragg Grating Using Fiber Reinforced Polymetric Composites,” Vol.29, No.3, pp.519-526, Journal of the Chinese Institute of Engineers. (SCI)
  22. C.S. Shin, C.C. Chiang and S. K. Liaw, 2006 “Comparison of Single and Double Cladding Long Period Fiber Grating Sensor Using an Intensity Modulation Interrogation System,” Optics Communications, Vol. 258, pp.23-29. (SCI)
  23. C.S. Shin and C.C. Chiang, 2005 “Deformation Monitoring by Using Optical Fiber Grating Sensor,” Journal of the Chinese Institute of Engineers,Vol.28, No.6, pp.985-992. (SCI)
  24. C. Q. Cai and C. S. Shin, 2005, “A Normalized Area-Compliance Method for Monitoring Surface Crack Development in a Cylindrical Rod,” International Journal of Fatigue, Vol.27, Issue 7, pp. 801-809. (SCI)
  25. M.C.Young, S.L.I.Chan, L.W.Tsay and C. S. Shin, 2005 “Hydrogen-Enhanced Cracking of 2205 Duplex Stainless Steel Welds,” Mat. Chem. Phy., Vol. 91, No.10, pp. 21-27 (SCI).

 

國際會議論文 (International Conference Papers):

  1. Shen, Y. L., Shin, C. S, 2009, “The Identification of Wall Thickness Change in the Pressure Pipelines Using a Distributed Fiber-Optic Sensing System”, 20th International Conference on Adaptive Structures and Technologies October 20-22, 2009, Hong Kong.
  2. Shin, C. S., Chen, B. L., 2009, "A comparison of interrogation schemes for impact event monitoring using fiber Bragg gratings" in Second International Conference on Smart Materials and Nanotechnology in Engineering, edited by Jinsong Leng, Anand K. Asundi, Wolfgang Ecke, Proceedings of SPIE Vol. 7493 (SPIE, Bellingham, WA 2009) pp. 749314-749314-6 (EI)
  3. C.S. Shin, B. L. Chen & J. R. Cheng, 2008, “An impact events monitoring system for wind turbine blades”, Multi-functional Materials and Structures2008, July, 2008, Hong Kong, Advanced Materials Research Vols. 47-50, pp 431-434.
  4. B. L. Chen & C.S. Shin, 2008, “Fiber Bragg Gratings Array for Structural Health Monitoring”, Multi-functional Materials and Structures2008, July, 2008, Hong Kong, Advanced Materials Research Vols. 47-50 (2008) pp 407-410.
  5. C.S. Shin, B. L. Chen & C.C. Chiang, 2007, “A Dynamic Strain Measurement System Using Fiber Grating Sensors and its Application in Structural Health Monitoring,” World Forum on Smart Materials and Smart Structures Technology, SMSST’07, Chongqing & Nanjing, China, May 22-27, 2007.
  6. C.C.Chiang, C.S. Shin & S. K. Liaw, 2006, “An Intensity Modulation Based High-Speed and High-Resolution Long-Period Fiber Grating Sensor Interrogating System,” Advanced Environmental, Chemical, and Biological Sensing Technologies IV, Optics East, SPIE, Oct. 2006, Boston Ma., USA. Proc. of SPIE Vol.6377, 63770W-3.
  7. S.K. Liaw, M. Chang, C. Chiang, CS Shin, "Reconfigurable optical add/drop multiplexer with 8.0 dB net gain using double pass amplified scheme," Proceedings of SPIE Vol. 6389, 638916 (2006) (EI)
  8. C.S. Shin, C.C.Chiang, 2005, “Embedded Fibre Bragg Grating Sensors for Internal Fatigue Damage Monitoring in Polymeric Composites,” Paper no.: 05A-635, 1st International Conference on Advanced Nondestructive Evaluation, Jeju, Korea, Nov 7~9, 2005.
  9. Raghu V Prakash 1 and Chow Shing Shin, “Cyclic Indentation Testing as A Tool to Evaluate the Fatigue Properties of Materials,” Paper no.: 0S09AA39, ICEM05, International Congress on Experimental Mechanics & 4th. Asian Conference on Experimental Mechanics, New Delhi,India, Sept 12-14, 2005.
  10. Chow-Shing Shin, Chih-Hao Lin, Chia-Chung Chiang, Chun-Jung Wang, and Shien-Kuei Liaw , 2005 “Temperature Compensated Fiber Bragg Grating Using Fiber Reinforced Polymeric Composites,” Paper No.: P1242, 10th OptoElectronics and Communications Conference (OECC 2005), Seoul, Korea ,July 4- 8, 2005

 

國內會議論文 (Domestic Conference Papers):

  1. C.Y. Liu, C.S. Shin & C.P. Lin, 2008, “A critical analysis of frequency and temperature effect on the fatigue life of rotary endodontic instrument”, 2008 International Symposium on Biomedical Engineering, Dec. 12-13, Tao Yuan, ROC
  2. Y.T. Tseng, C.S. Shin & Y.H. Tsuang, 2008 “Development and application of a miniature fiber-optic needle pressure sensor”, 2008 International Symposium on Biomedical Engineering, Dec. 12-13, Tao Yuan, ROC.
  3. 單秋成,陳品成,2004,“利用小尺寸圓桿試片進行疲勞性質測試之技術”,中華民國第八屆破壞科學研討會論文集A1-07,民國93年3月26-27日,墾丁,中華民國。

 

專利 (Patents):

    • 單秋成,葉健文 (2008) “光纖感測系統”,中華民國專利公開號200604501,初審核准。
    • 單秋成,葉健文 (2007) “Fiber-Optic Sensing System for In-Vivo Measurement of Biological Parameter,” 美國專利US7,196,318.
    • 單秋成,林俊彬,李偉民 (2007) “Fiber-Optic Sensing System for Measuring Curvature,” 美國專利 US7,212,694。
    • 單秋成,林俊彬,李偉民 (2006) “用以量測彎曲度之光纖感測系統,” 中華民國新發明專利 266635。
    • 單秋成,林志豪,江家慶,廖顯奎,曾昱璋,陳宣臣 (2006), “Device and Method of Temperature Compensating Optical Component,”美國專利US7,031,570。
    • 單秋成,江家慶 (2006) “Energy-Modulating Fiber Grating Sensor,” 美國專利US7,005,630 。

 

TOP