首頁 > 系所成員 > 本系教授 > 盧中仁副教授 返回首頁連絡我們


姓名Name 盧中仁(Lu, Chung-Jen)
職稱Title 副教授 Associate Professor
辦公室Office 工綜631
電話Phone 33662704
傳真Fax  
電子郵件E-mail cjlu@ntu.edu.tw
個人網頁Homepage http://140.112.14.7/~cjlu/
實驗室Lab  
自傳
Short Biography
美國加州大學柏克萊分校博士
研究領域
Research Interests
接觸力學、非線性振動,熱彈性分析、模態分析
contact mechanics, nonlinear vibration, thermoelastic analysis,
modal testing
教學課程
Teaching Courses
http://140.112.14.7/~cjlu/
研究計劃
Research Projects
http://140.112.14.7/~cjlu/
研究著作
Publications

期刊論文 (Journal Papes):

1.Ming-Cheng Wang and Chung-Jen Lu, 2007, “Dynamic Characteristics of a One-Unit Ball-Rod-Spring Balancer,” ASME Journal of Vibration and Acoustics, 129, pp. 520-524.

2.Chung-Jen Lu, 2006年, ASME Journal of Vibration and Acoustics, Vol.128-1, pp.122-125, “Stability Analysis of a Single-Ball Automatic Balancer.”

3.Lu, C.-J., Chiou, S.-S., and Wang, T.-K., 2004, “Adaptive Multilevel Method for the Air Bearing Problem in Hard Disk Drives,” Tribology International, 37, pp. 473-480. (NSC-89-2212-E-002-109)(SCI)

4.Lu, C.-J. and Wang, Tai-Kuo, 2004, “New Designs of HDD Air-Lubricated Sliders via Topology Optimization,” ASME Journal of Tribology, 126, pp. 171-176. (NSC-89-2212-E-002-109) (SCI)

5.Lu, C.-J. and Chiou, Shean-Son, 2003, “On the Interface Diffusion Coefficient for Solving Reynolds Equation by Control Volume Method,” Tribology International, 36, pp. 929-933. (NSC-89-2212-E-002-109)(SCI)

6.Lu, C.-J. and Kuo, M.-C., 2003, “Coefficients of Restitution Based on A Fractal Surface Model, ” ASME Journal of Applied Mechanics, 70, pp. 339-345. (NSC 87 – 2212 – E – 002 - 049) (SCI)

 

國際會議論文 (International Conference Papers):

1.Wang, Ming-Cheng and Lu, C.-J., 2007, “Stability Analysis of a New Design of Ball-Type Automatic Balancer,” The 12th Asia Pacific Vibration Conference, Sapporo, Japan

2.Lu, C.-J. and Hung, Chia-Hsing, 2006, “Stability Analysis of a Three-Ball Automatic Balancer,” The Thirteen International Congress on Sound and Vibration, Vienna, Austria

 

國內會議論文 (Domestic Conference Papers):

1.王明正、盧中仁,2006,“單滾珠彈簧自動平衡機構之穩定性分析”,第二十三屆中國機械工程全國學術研討會,昆山科技大學

2.黃仕軒、盧中仁,2005, “滾珠自動平衡裝置在雙平台懸吊機構上的動態特性,” 第二十二屆中國機械工程全國學術研討會,國立中央大學

3.蘇昱仁、盧中仁,2004,“ 隨機Cantor集表面模型下的彈性接觸分析”,第二十八屆全國力學會議,國立台灣大學

4.陳志強、盧中仁,2003,“單滾珠自動平衡機構之穩定性研究”,第二十屆中國機械工程全國學術研討會,國立台灣大學

 

研究計畫 : 過去五年總計畫經費 NT$ 3,804,900

Research Projects: Total fund in the past five years: NT$ 3,804,900

1.配備滾珠型自動平衡裝置光碟機的全域動態分析,主持人,計畫期間:07/08/01~08/07/31,委任單位:國科會,研究經費:NT$751000。
Global Dynamical Analysis of the Optical Disk Drive Equipped with a Ball-Type Automatic Balancer, 96-2221-E-002-216-, NT$751000

2.基於隨機Cantor集表面模型的接觸熱阻分析,主持人,計畫期間:06/08/01~07/07/31,委任單位:國科會,研究經費:NT$678000。
Thermal Contact Resistance Analysis Based on a Random Cantor Set Surface Model, 95-2221-E-002-050-, NT$678000

3.滾珠型自動平衡機構在剛性長轉子動態平衡上的應用,主持人,計畫期間:05/08/01~06/07/31,委任單位:國科會,研究經費:NT $898000。
Application of Ball-Type Automatic Balancer to the Dynamic Balancing of Long Rigid Rotor, 94-2212-E-002-033-, NT$898000

4.新型滾珠自動平衡裝置的研發,主持人,計畫期間:04/08/01~05/07/31,委任單位:國科會,研究經費:NT$689300。
Development of a New Ball-Type Automatic Dynamic Balancer, 93-2212-E-002-066, NT$689300

5.集中力矩作用下拱樑的動態行為–新型雙態微致動器的分析,主持人,計畫期間:03/08/01~04/07/31,委任單位:國科會,研究經費:NT$ 405,100。
Dynamical Behavior of Shallow Arch under Concentrated Moments- Analysis of a New Design of Micro-Actuator -, 92-2212-E-002-086, NT$ 405,100

6.基於隨機Cantor集表面模型的粗糙面彈塑性接觸分析,主持人,計畫期間:02/08/01~03/07/31,委任單位:國科會,研究經費:NT$ 383,500。
Elastic-Perfectly Plastic Contact Analysis of Rough Surfaces Based on Random Cantor Set Models, 91-2212-E-002-041-, NT$ 383,50



 

TOP