- 課號 :522 M2870
- 類別 :選修
- 名稱 :切削原理
- 英文名稱:
- 學分 :3
- 適修年級: 研究所
- 課程大綱:
- Introduction ; importance of the machining; historical
review of metal cutting researches.
- Chip formation; types of chip ; mechanics of metal cutting ;
orthogonal cutting model , force , stress , strain rate
relationships ; estimation of cutting forces and power.
- Shear strain in cutting ; shear angle relationship ; shear
stress in metal cutting ; friction at tool-chip interface ;
discussion.
- Temperature in metal cutting ; measurement ; analytical
approach ; dimensional analysis.
- Wear and tool life ; wear mechanisms , types of cutting tool
wear and failure , tool life criterion ; BUE formation and
effects.
- Cutting fluids : cutting fluid action and explanation.
- Tool materials , and work material considerations.
- Complex tools : basic relationships ; turning , milling ,
drilling ; rotary cutting tools.
- Surface finish : measurement and specification ; factors
affecting surface finish.
- Chip control : chip curl mechanisms , chip control methods.
- Grinding : effects of grinding conditions , analysis of
grinding process.
- Economics of metal cutting operations.
- 預修課程 : 機械製造、材料力學、熱傳學
- 授課老師 : 廖運炫
- 課程說明 :
- 本課程主要是介紹金屬切削時的原理與如何應用這些原理於實際的加
工。對於實際切削加工時遭遇的問題及對策﹐刀具的設計、選取﹐工
件的考慮﹐如何達到所要求的表面光度﹐與切削時的經濟性等﹐均有
所論及﹐是有志於從事切削加工實務與研究者必備之一門課程。
- 本課程是機械製造課程中有關金屬切削部份的延續。到目前為止﹐系
上尚無其他可修之後續課程。將來可能開的後續課程有:非傳統切削
加工、超精密加工專題等。
- 本課程不需要特殊的數學或電腦工具。
- 上課方式係以投影片配合黑板之講解(若人數少時將於期中安排參觀
機械研究所、中科院二所製造總廠或航發中心等)。
- 評分考試 :
- 期中將有一份約十題之習題﹐期末有一次考試﹐並希望能於期末交一份與
切削加工有關之報告(題目可自選或要求指定)。
- 注意事項 :
|